Post Reply
Home » Forums » MMOViper Forums (PUBLIC) » General Discussion Area

General Discussions Thread : General Discussion Area
Posted:   #316
ViperDiscord
Posts:0 Joined:Sun Mar 15, 2026 4:03 am
Which one the one you listed above?
Posted:   #317
ViperDiscord
Posts:0 Joined:Sun Mar 15, 2026 4:03 am
this one
Posted:   #318
ViperDiscord
Posts:0 Joined:Sun Mar 15, 2026 4:03 am
Thats the exact one i have
Posted:   #319
ViperDiscord
Posts:0 Joined:Sun Mar 15, 2026 4:03 am
it was like $150 shipped. the $44 is for the kmbox
Posted:   #320
ViperDiscord
Posts:0 Joined:Sun Mar 15, 2026 4:03 am
So if you need flashing software for it, I got it somewhere..
Posted:   #321
ViperDiscord
Posts:0 Joined:Sun Mar 15, 2026 4:03 am
Nice OpenOCD should do it
Posted:   #322
ViperDiscord
Posts:0 Joined:Sun Mar 15, 2026 4:03 am
Maybe.. let me know. ISome jtag software would not work with it.. i had to use a custom one
Posted:   #323
ViperDiscord
Posts:0 Joined:Sun Mar 15, 2026 4:03 am
The listing on Aliexpress says to use OpenOCD, so we'll see
Posted:   #324
ViperDiscord
Posts:0 Joined:Sun Mar 15, 2026 4:03 am
I'll try and let you know
Posted:   #325
ViperDiscord
Posts:0 Joined:Sun Mar 15, 2026 4:03 am
Well there ya go!
Posted:   #326
ViperDiscord
Posts:0 Joined:Sun Mar 15, 2026 4:03 am
It was fun learning how to make a firmware.. lots of options.. and that was before GPT could do it probably for you. Took 2 days to learn all the ins and outs..
Posted:   #327
ViperDiscord
Posts:0 Joined:Sun Mar 15, 2026 4:03 am
Hmm OpenOcd couldn't pull firware from my soundblaster, may need to plug in a nic.
Posted:   #328
ViperDiscord
Posts:0 Joined:Sun Mar 15, 2026 4:03 am
You dont get the firmware that way if you are wanting to make your own for your dma
Posted:   #329
ViperDiscord
Posts:0 Joined:Sun Mar 15, 2026 4:03 am
https://github.com/Silverr12/DMA-CFW-Guide

Image

Modified by: PitViper on 2026-06-25 04:56:18 PM
Last edited by ViperDiscord on Thu Jun 25, 2026 9:56 pm, edited 1 time in total.
Posted:   #330
ViperDiscord
Posts:0 Joined:Sun Mar 15, 2026 4:03 am
This is the way...
Post Reply

Return to “General Discussion Area”